simonthewizard

Albrecht AE6110 Export Mode & FM Receive

So with the warranty lost and gone at the click of a screw here is the export mode, the high power mode and the 0 and 5 ending mode for this Qixiang produced AE6110 Multi Norm CB Radio. Remember you need to cut the warranty sticker, this will make the warranty away. If you need a warranty don’t cut the sticker remember.

9166_0

Close OP1 and you have 25615-30105 AM/FM with 4 watts Power

Hold the PTT, DN Button and the RF Gain while turn on the radio you get PL, press the UP on the mike till PH is on screen and then turn off. When turn on again the H is on the display of the radio

0 and 5 ending press and hold RFGAIN and P is on screen, this is 0 ending. Press and hold RF GAIN again and E is on screen so band to 5 ending channels

CLOSE OP2 and 10m mode is enabled, the power modification is the same as with the 11m mode.

You loose all EU norms menu in EXPORT MODE so no ending .125 in UK mode. Band dE will be the mid band for use.

DOWNLOAD CRT One, the modification is the same and can be found in the Modifications menu on the front page.

All Rights Reserved (c) http://www.simonthewizard.com 2013-2014-2015 Unathorised Use / Or Duplication of this material without express and written permission from this blog’s author is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to simonthewizard and http://www.simonthewizard.com with appropriate and specific direction to the original content.

2 comments

  1. a great radio but I would leave as is and not lose uk40 there getting smaller and better good for the modern cars and easier to place in the car

    • Yes I agree with that but more traffic in summer away from uk40 here so use it there 😀 But!! Nice audio and receive like CRT Mike and others. Good working piece of kit and for the price leaves some others in the dust

Comments are closed.