Seems now to slowly become more available. We’ve seen the 136-174Mhz version based on the Anytone Apollo 1 base but now it appears as a 400-480Mhz 25 watt, 15 watt and 5 watt power setting. And more importantly it comes with the 6.25khz** step for the PMR people too.
VFO frequency mode and Channel mode switch
Frequency scan function
Channel scan function
Transmitting audio signal
Channel delete
Squelch off momentary
CTCSS/DCS encode and decode setup
DCS Scan
FM Radio and two way radio mode switch
Power level control
offset direction and offset frequency setup
Keypad lockout
Signaling combination setup
High/middle/low power selection
Band-width selection
Busy channel lock-out (BCL)
Roger beep
Audio signaling call setup
Edit channel name
TX OFF/ON
Reverse TX/RX
Talk around
Frequency Step Selectable 5/6.25/8.33/10/12.5/20/25/30/50KHz
Squelch level setup
Display mode setup
APO Setup
Pilot frequency
Time-out timer (TOT)
Scan dwell time setup
Mic gain setup
LCD Contrast ratio setup
Backlight brightness/color setup
Voice prompt setup
Automatic power on(AOP)
PC software programmable,usb cable is not includes in package
Reset factory default
CE RoHS Certificate
** Illegal to use on PMR radio whether with step or not
Best price I’ve seen it so far from China is €83 but excludes any import taxes and duties of course. Sure someone I guess like CRT France for example could pick this up. Only time will tell I guess.
All Rights Reserved (c) http://www.simonthewizard.com 2013-2014-2015-2016 Unathorised Use / Or Duplication of this material without express and written permission from this blog’s author is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to simonthewizard and http://www.simonthewizard.com with appropriate and specific direction to the original content.
this could become very interesting