Xiegu X-108 Unbox & QSO

Thanks to Diddi whose used the contact form to tell me that I’ve not spoken about the X-108 QRP HF transceiver and with his email he included a link to a video of an unboxing and this also included the first QSO on 10m. Thanks Diddi and as promised I’ve added the article


Features:

Microphone – multifunctional

CW Filter (500 Hz)

SSB Filter (2.4 kHz)

AGC

S Meter – PO Meter – SWR Meter

Adjustable 1-20 watt output

Modes – AM – SSB – CW

0.5 – 30 MHz (9 filtered ham bands)

High SWR protection

Pre-amplifier / Attenuator

USB control port (uses plain USB-a to USB-b cable)

CW Keyer

SO239 antenna connector

0.5 ppm TCXO Module

Noise Blanker

Front & Rear Handles

4-3/4 x 1-3/4 x 7-1/16 inches

Radio Weight – 1 kg – 2.2 lb

Mic Weight – 0.143kg – 5oz

12.5 – 14.5 vdc / 0.5 – 6.0 amps

Video is old but hey it’s included!!

All Rights Reserved (c) http://www.simonthewizard.com 2013-2014-2015-2016-2017 Unathorised Use / Or Duplication of this material without express and written permission from this blog’s author is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to simonthewizard and http://www.simonthewizard.com with appropriate and specific direction to the original content.

One comment

  1. I had one of the earlier ones back in Feb 2015. But it was beset by problems.

    Mine basically went kaput, like quite a few and in April 2015, I had to send it back to Wimo, who then sent a whole batch of them back to China. They weren’t repaired, but replaced with the MKII X108G model (outdoor version) after six months. I sold mine on without ever taking it out of the box.

    I understand that the X108G is now quite decent and the RX I had on mine (original) was excellent. They don’t have FM in case anyone is thinking 11m.

Comments are closed.