I’m sharing with you all now some settings that Rob (RPComms) told me about and I can say for me they’ve worked and shared a video with him and all is well. Just in my case also I’ve some strange local noises but otherwise I can say the settings below have worked well for me over the last 7 days.

Things To Change:

Adjust the RF Gain so 4 or 5 lines are shown and not wide open

Set the tone to -4 from wherever you’ve got it set now

That’s it!

Yes the noise level lowers due to not being wide open and set the RF Gain lines to what’s best for you but the difference in receive on my side was almost nothing noticeable so was worth a try.

Report back and let us know your ideas and was it any better or worse for you?

The official RP Comms video above

All Rights Reserved (c) http://www.simonthewizard.com 2013-2019 Unauthorised Use / Or Duplication of this material without express and written permission from this blog’s author is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to simonthewizard and http://www.simonthewizard.com with appropriate and specific direction to the original content.