Modifications II

Nanfone CB-689 rU Mode (Team, Allamat, TP etc)

Close the Jumper

President Mc Kinley EU

President Lincoln II V3 Service Manual

Service manual LINCOLN II GG 23 03 2015

President MC Kinley USA Service Manual

Service manual Mc KINLEY US 12 24

 

Lafayette Ermes (240 Channel. Close Jumper)

 

President Richard Modification (Remember PD 1234)

CRT 4M / Com Setup Software https://tinyurl.com/ychgokzg

CRT 4M / Ham Software https://tinyurl.com/y9da9tc9

CRT 2000 H (High Power)

RF Limited CR-577 Microphone Wiring

Stryker SR-94HPC (Thanks Dave W)

CRT Xenon Expand (note is 24.7 upwards)

DX-5000 / Anytone 5555 Service Mode Settings

President Bill ASC Manual : Bill ASC 4 langues POL v2.02 BD

CRT FP00 Expansion:

Intek M-495 Power (Full Mod)

Intek M-795 Power (Full Mod)

North American Version Yaesu FT~270/FT~277

Anytone AT-5555 v6 / v7 Circuit Layout

AT-5555-V6-7-Schaltplan-_-Layout

President Barry 12/24v ASC Service Manual

Service Manuals_Service manual BARRY AM FM 12 24

Yaesu FT-25 Unlock:

FT-25 EXPAND TX

Turn radio OFF

Press and hold ptt and Tcall (under the ptt) Turn radio ON Relase the buttons insert this number 22406665

The radio reboots and TX is expanded!

Icom IC-7610: Full Unlock Markus PA2DB

President Ronald 12/10m Manual: https://tinyurl.com/yb4qzppq

President Jackson Service Manual: http://tinyurl.com/y864zfos

President Johnny III ASC / Harry III ASC Service Manual: http://tinyurl.com/ydbtn8ro

President Johnny II / Harry II ASC, Harry II Classic Service Manual: http://tinyurl.com/yaywfwrz

President Harry AM/FM Service Manual: http://tinyurl.com/y9baa2k9

President Harrison Service Manual: http://tinyurl.com/y9zfclgc

President Grant Service Manual: http://tinyurl.com/q4mws39

President Glenn Service Manual: http://tinyurl.com/y7yuy7j6

President George 1994 Draft Copy Service Manual: http://tinyurl.com/ycglkx2w

President George 2002 Service Manual: http://tinyurl.com/y72jj9xf

President George 2005 Service Manual: http://tinyurl.com/yauvbdw8

President Billy Service Manual: http://tinyurl.com/yda7ysjp

President Henry ASC 12/24v Service Manual: http://tinyurl.com/y9mvm4vg

President Benjamin Service Manual: http://tinyurl.com/yb39offq

Intek MT-5050 Hidden Features:

Hold: Both Arrow Keys.  Turn Radio On. = Low Power Mode. 0.1w

Hold: Monitor & Down Arrow & Turn Radio On. =Chan 446/Pmr Mode.

Hold: Scan & Up & Down. Turn Radio On. = 69 Lpd 0.1w

Hold: Scan & Down & Menu. Turn Radio On. = 69 Lpd Full Power 4 Watt

Hold: Scan & Monitor.  Turn Radio On. = 99 Channels = 446 + Hi Lo Duplex

Hold: Scan & Monitor & Down. Turn Radio On =69 Lpd Plus PMR 446 8 Channel At Full Power 4w

To Reset, Power Cycle Radio.

Yaesu FT-65 R/E Expanded TX

FT-65 R/E EXPAND TX

Turn radio OFF

Press and hold ptt and Tcall (under the ptt)

Turn radio ON

Relase the buttons

insert this number 62406665

The radio reboot and now is expanded.

CRT Micron UV:

1)    Push and hold [ P4] and [FUNC ] keys while turn on the radio 2)  The radio enters in “TEST MODE “and display CH XXX. 3) Turn the channel rotator to displaying CH-043 and MODE 01 4) Push and hold PTT key , 01 will be display in blue color , turn the channel rotator to displaying 02 , then release PTT key . 5) Turn off and on again the radio. 6) The CRT MICRON can work now between 136 to 174 MHz and 400 to 490 MHz.

Uniden 980 SSB: To stop key beep press and hold ANL, Bep On & Bep Of (2016 models only)

Icom 7410 modify for working on 60m band: Remove Diode D1515 on the main unit

CRT 279UV Unlock:

Turn on the CRT 279 UV and immediately after press and hold the right selection button A password menu appears: enter the code 1001201 with the keys of the microphone

Input the VHF frequencies like this: 1361741 which corresponds to the chosen frequency band from 136 Mhz to 174 Mhz Input the UHF frequencies like this: 4004701 which corresponds to the chosen frequency band from 400 Mhz to 470 Mhz

To return to the origin made the reverse procedure 144 Mhz – 146 Mhz and 430 Mhz – 440 Mhz

Anytone AT-588UV Software: http://tinyurl.com/ht8moa9

Anytone AT-398UVD Software: http://tinyurl.com/zrmro6r

Baofeng DM-5r Software: http://tinyurl.com/hmfvhlw RAR Password 123456

WOUXUN Unlock & Various Baofeng: http://tinyurl.com/h72vv4v

Possible WOUXUN KG-UV9d Unlock: http://tinyurl.com/h9pkyro

Kenwood TS-590SG MARS/CAP


Yaesu FT-891 MARS / CAP (HB9TTU)


Anytone Apollo II Software V1: http://tinyurl.com/z95jsyb

Yaesu FT-891 MARS/CAP (c) Funktechnik Bielefeld

Above is confirmed ok on U.K. Release 891

——
Cre8900 Schematic, Software, circuit diagrams, all information: http://tinyurl.com/hb9p3ga

Kenwood TH-D74 (E) Extended Transmit: Remove R761

Direct link to very many programming softwares all brands: http://tinyurl.com/zh43sfm

Baofeng UV 50×3: http://tinyurl.com/hevfsdt

Midland G9 Power: http://tinyurl.com/hoale9k

Midland G10: http://tinyurl.com/hpqghdy

Midland G8 Power / Bands: http://tinyurl.com/j88wrps

Midland G18 Service Manual: http://tinyurl.com/gvs5ovc

Midland GB-1: Software + Cable to extend the flexibilitiy and the features of this radio is PRG-GB1 (5w and more)

Midland G7 Change Bands & Power: http://tinyurl.com/jvaprjg

Vaesu UV-8DR Programming Software: http://tinyurl.com/gvwf3c6

Alan HP-450 Service Manual: http://tinyurl.com/gr2zol7

CRT 4CF Unlock Bands: http://tinyurl.com/zcq6kwy

CRT 4CF Software (Prolific Driver 3.2.0) http://tinyurl.com/z65cy8y

CRT 4CF Software 1.02: http://tinyurl.com/jt9hxgp

Midland CT-890 Software: http://tinyurl.com/j4essxm

Alinco DJ-G7e Frequency Unlock: http://tinyurl.com/hfl8tj6

Alinco DJ-V17 Frequency Unlock: http://tinyurl.com/zx43x7j

64 thoughts on “Modifications II

  1. Hi simon,
    Thank you for your portal where i got to learn a great lot! would like to know the peak and tune you did in the president bill for repeater high and low power..
    lovingly,
    John 73

    Like

    • Hello John,

      The modification is in the European sold President Bill. If your in USA etc it won’t work. Put it easily

      Move jumper from 1/2 till 2/3
      Cut the white wire
      Solder Closed jumper 3

      No peak and tune as no variables inside to tune.

      But ONLY on European Version

      Regards
      Simon

      Like

  2. Hi there
    I’m lookikg for a service manual for CRT SS6900N. No plans to like around but for educational purposes only.
    Cheers
    Bib

    Like

    • Hi There. Only via CRT if you are a dealer. Factory does not release it since intellectual copyright theft from previous models..

      For educational purposes other service manuals are on here to download

      Like

  3. Does anybody know how to extend a TYT TH-8600 that is limited to 144-146 and 430 -440 beyonf that? Tried already Programming SW, but without luck.
    Thanks.

    Like

  4. Hello dear sir, I’d like to put my problem here, looking forward for your kind opinion and (maybe) your suggestions.
    My Anytone AT-588 UHF amateur tranceiver, transmits normally in full, medium or low power, without problems in the whole amateur uhf band, in simplex mode.
    But if I try to transmit, in order to open the nearby repeater (in distance less than 10 miles), using the 88.5 tone and the -7.600 shift in memory channel 02, my voice is distorted (according to the reports of other hams + my monitor from a rearby handheld).
    I tried to reset the rig, from the RESTORE menu, but the problem still exists.
    My power supply is quite strong, the feeding line is a checked 50 ohms RG 213 cable and the antenna is a factory made Diamond X-50 at 50 ohms.
    Any solution please ??
    Thank you kindly for your time !!

    Like

    • Hi Ken. It’s not a resistor as far as i know. Take a look in Modifications II it’s what was sent me. My test piece was unlocked so never saw the mod but it needs the password to unlock it

      Like

    • Hi Don.

      On the board should be two resistors stood in the air. One makes the radio cover all the Europe bands like DE, PL and UK. If you cut both it unlocks it for 11 metres. I believe the EU one labelled R299 and one next to it too makes it converted.

      If you’ve a photo send me as not home where radio is currently. But it’s R299 and one next to it 🧙‍♂️

      Like

  5. Hi Simon. Thanks for the Info on the Yaesu FT-65/E Radio Tx unlock. It works like a charm!
    Do you have any information in relation to the difrences between the Aisan and European versions? as far as i can see the units and frequencies are the same, the only obvious diffrence being the lack of the Scrambler function Menu Item 39 on the European version.
    I guess what im asking is there any way to put the European verson into Asian Mode to activate the scrambler (voice inverson) function. either by a code input or jumper soldering? or is there a phyical difrence in the units or the firmwares?
    Any information would be apreciated!
    Thanks!
    Tim.

    Like

  6. buenas tardes,
    pertenezco a un grupo de rescate en Colombia y tengo un yaesu FT 25/E comprado en E.U, realice todos lo pasos que tu mencionas para desbloquear o extender la banda del equipo, el radio se reinicio pero no se desbloquea. agradezco que me puedas ayudar con este tema.

    gracias

    Like

    • From the importer:

      FT-25 EXPAND TX

      Turn radio OFF

      Press and hold ptt and Tcall (under the ptt) Turn radio ON
      Relase the buttons insert this number 22406665

      The radio reboots and TX is expanded!

      Like

  7. Hi Simon,
    thanks for your cool homepage. yesterday i made the tx – mod for the yaesu ft65 and it works fine.
    thanks a lot for this very usefull information.
    73 de dh1lm, lothar

    Like

  8. Hi Simon!

    A question about moding Midland GB1 to “export mode” – is there any soldering needed or is it purely software related issue?
    PS! Thank you for running such an informative blog! Respect!

    73!

    Like

  9. Hello.. My friend has bought CRT 279UV. In VFO is able to set any freq., but when opened in any SW to program memories, there is band limitations 144-145 and 430-439. Unable program standard HAM repeaters, nothing outside this range.
    Anny suggestion how to expand this?

    Like

    • Unfortunately I haven’t got it in my hands, but my friend bought it via local reseller and haven’t doing any modifications. But in VFO mode normaly operating in HAM bands. Yesterday we have been trying program memories, him first and me then via remote desktop and found this non-standard range. If it was out of the box, there should be at least 144-146 but not 144-145.
      70cm we have also 430-440 not 430-439, most of the repeaters have downlink above 439. We have tried it with CHIRP and CRT-VIP-CTS – same issue found. Today evening will try your unlock procedue and will see, if have changed. I’ve go Bao GT3TP and there was possible change it Chirp easily, in this case the range is greyed and unable to change.

      I have not much experience with those chinese radios, not understand, why memory and vfo range are different.

      Like

    • Understand you very well. I did check and the radio comes standard 144-146 and 430-440 MHz they told me. So it could be ok as 440Mhz. If not ok let me know and I’ll ask again, but code should work. Others used it and told me it’s ok. It does seems rather strange if you’ve got 144-145 and 430-439

      Like

    • Well, unlocking helped, all freq. programmed succesfully..
      Just in Chirp was not able set channel+names on display, was set via CRT-VIP
      All as QYT KT-9800D model..

      Thanks for help.. Best regards..

      Like

    • I was asked this just this morning. AT-5289 needs programming software to unlock it fully 25.6-30.1 and can use same programming cable as the Stryker SR-955 / SR-655 / CRE8900 and Alinco DR-135DX

      Like

  10. Hi Simon, i don’t suppose the Yaesu FT-891 TX MARS / CAP Mod is available yet is it, i’ve approached Yaesu UK but they refuse to issue me the info

    Kind Regards,

    Like

Leave a Reply to JP Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.