So here it is released today the V1.10 update firmware for the iradio 98 Plus. I’m told pretty much it’s akin to the v1.09 Radtel 880 update of a few days ago.

Below found online

20250520 V1.10

1.APRS adds a PTT-linked channel. In APRS Beacon Mode -> PTT After CH, you can select a specific channel. After releasing the PTT, the APRS beacon will only be transmitted on the specified channel.”

2.Due to frequent user misoperations causing reduced power output, the 28 Temporary Tuning function is now disabled by default. To enable temporary debugging,

hold down the ‘5’ key while powering on. However, this setting will reset after each shutdown

(Note: This tuning feature is intended for experienced users only. It is not recommended for inexperienced users, as improper adjustments may disrupt device functionality).”

All Rights Reserved (c) http://www.simonthewizard.com 2013-2025 Unauthorised Use / Or Duplication of this material without express and written permission from this blog’s author is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to simonthewizard and http://www.simonthewizard.comwith appropriate and specific direction to the original content