Finally an update has arrived for this handheld radio. As an owner and of course someone who noticed a few oddities with the radio it’s nice to get a main firmware and sub firmware update. Main firmware goes to 1.04, Sub Firmware to 1.01 and DSP to 0412
The software needs an additional driver so when this is installed the updates flew into the radio via USB and works fine on Windows 10 environment. All that’s left now is to re-connect and install the memory channels again as a full reset needs to be carried out after each installation of the firmware
And of course below we supply a link to the new version software:
Happy Updating. Thanks to Manuel at Limmared for the tip!!
All Rights Reserved (c) http://www.simonthewizard.com 2013-2014-2015-2016 Unathorised Use / Or Duplication of this material without express and written permission from this blog’s author is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to simonthewizard and http://www.simonthewizard.com with appropriate and specific direction to the original content.