UNMATCHABLE
Low SWR on 80 channels
Completely watertight coil
Stylus in harmonic steel, tapered, stainless, very robust and nickel-plated
maximum power 2000 Watt in AM and 4000 Watt PeP in SSB and AM (tested up to 5KWatt PeP)
Winding made with 3.5mm silver plated copper
Use of high temperature and weather resistant materials: stainless steel nickel plated brass
Great heat capacity due to high metal mass
Optimized for best heat dissipation
Total height 1.99m.
Coil height :180 mm
Maximum body-coil diameter: 60mm
Complete reel weight: 810 g
Resonance curve centered at 27.2 Mhz
Limited calibration operations (normally not necessary in the center of the roof)
Individually tested
In short circuit (in direct current) with consequent improvement of the rejection to unwanted signals (electrical, out of band, QRN or impulsive noises)
Hole diameter required for mounting: 16mm
Suitable for sheets from 0.8 to over 5mm
Ideal for side bracket mounting
Water tightness towards the passenger compartment guaranteed by a neoprene ring (O.R.) 2 OR to protect the coil from water
Stainless steel coil jacket anti-unscrewing grub screw
Stylus locked with 2 M5 and one M4 grub screws
Equipped with a “cap” to protect the base attachment with the radiating part disassembled
Equipped with Ultraflex 7 cable by Messi&Paoloni with Bx connection
Total availability of spare parts

All Rights Reserved (c) http://www.simonthewizard.com 2013-2023 Unauthorised Use / Or Duplication of this material without express and written permission from this blog’s author is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to simonthewizard and http://www.simonthewizard.comwith appropriate and specific direction to the original content.