Thanks again to Helmut Frequenzwaschl whose found some interesting information from the HamRadioShop Germany. Details below and remember local rules and laws when changing radio formats.
Link: https://tinyurl.com/4ch72t8a
The built-in module allows the device to be switched between multinorm and export mode.
The change occurs when PTT is pressed when switching on. The entire device performance TX/PWR and the frequency expansion are then available.
If you now want to switch back to normal multichannel mode, switch the device off and on again. Detailed instructions are included with the device.
You send us your President MCK and the device receives the following modification. Once completed, the device will be sent back to you.
All Rights Reserved (c) http://www.simonthewizard.com 2013-2023 Unauthorised Use / Or Duplication of this material without express and written permission from this blog’s author is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to simonthewizard and http://www.simonthewizard.comwith appropriate and specific direction to the original content.
No module is required for this, just a wire connection is sufficient.
is there a link to look at? if it is so easy why the module?
Oh…. is there a copy of the original SwitchMode V2.3© for G2 yet?
Even the name was copied “lol”