I found software by googling nothing else! Was bloody hard actually as radio comes actually no software direct from importer. Also Wouxun worked a few times on my radio..

This time we have a look at the Jopix CB-80 Commander for programming this newly released hand held. Programming ability for 400 memory channels and acceptable frequencies above and below the ones on the screen were possible so some sort of export mode appears to be there

Ability to program CTSCC and DCS is excellent and not mentioned on the information about the radio. Plus when I tried you can for example program RX 27.405 and TX 26.565 FM so maybe German Repeater use is possible. Plus KQ2H was tested in the software and it stored it when I saved it and no odd error message so “maybe” it’s possible to do it

Tricky to say but same frequencies on KG-R70EU were able to be programmed onto the CPS of the Jopix. But it’ll need a radio attached to see the real deal but it does look like the CB-80 could be received well as “maybe” it’s super programmable.

Remember ALL country legal rules and regulations. This software was found online. If you have tried and tested kindly let me know what you’ve managed to set up.

Photo is to show that out and about 10m mode is possible when you connect the software and a Baofeng cable. And it’s BNC not SMA like on the Wouxun which is already an advantage.

Thank you Helmut Frequenzwaschl for all extra help

All Rights Reserved (c) http://www.simonthewizard.com 2013-2024 Unauthorised Use / Or Duplication of this material without express and written permission from this blog’s author is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to simonthewizard and http://www.simonthewizard.comwith appropriate and specific direction to the original content