Frequency Coverage (programmable) :
* 80m (3.500.000 – 3.999.990)
* 40m (6.900.000 – 7.499.990)
* 30m (10.100.000 – 11.449.990)
* 20m (14.000.000 – 14.349.990)
* Tunning step : 1Hz, 10Hz, 100Hz, 1KHz, 10KHz, 100KHz (rotary dial push)
* Display : 3.2 Inch 320×240 pixel TFT
* Dimension : 90mm (height) x 220mm (wide) x 130mm (deep)
* Controller : ATMega128
* Main mixer : ADE-1 mixer
* IF Frequency : 8.000000 MHz
* Synthesizer : Si5351 with TCXO source clock
* Selectivity : 4 pole crystal ladder filter (3Khz nominal bandwidth)
* Power out : at 13.8V 100W at 80m, 90W at 40m, 60W at 30m, 30W at 20m
* Adjustable RX gain set with MMIC MSA series front end amplifier up to 0.1uV sensitivity
* Adjust TX gain set (adjust power out 0-100W)
* Adjust AF gain set
* Adjust Mic gain set with built in low noise mic compressor based on IC MAX9814
* Adjust IF Shift, RIT, XIT
* 2 x IRFP150 final transistor
* CW sharing filter with SSB
* Iambic keyer with programmable WPM/straight key (set 0 WPM) option setting
* PSU Voltage 13.8 V (12-13.8 V)
* RX current consumption : 380 – 385 mA (Vcc 13.8 V)
* TX current consumption : 80m 15 A, 40m 15 A, 30m 13A, 20m 10 A (Vcc 13.8 V)
*. 2 Watt, Speaker out

All Rights Reserved (c) http://www.simonthewizard.com 2013-2024 Unauthorised Use / Or Duplication of this material without express and written permission from this blog’s author is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to simonthewizard and http://www.simonthewizard.comwith appropriate and specific direction to the original content