Sat with no skip conditions and too much time to mess around with I had wondered if can make the President BT Mike work on my 5555N Plus. First off switch out the 4 pin and fit on a board a 6 pin with GDCH wiring so the Digi Mike can also work and away we go Bluetooth is now working well

Take out the 4 pin and attach the new six pin and attach board inside the radio. Drag the voltage off the on-off switch at the top of the board and tighten and secure case back together. Result The President Digi Mike and the President Remote BT Mike and others which need voltage are now working very nicely indeed. Adjust the Elec and Dyna to what you need and away you go!

All Rights Reserved (c) http://www.simonthewizard.com 2013-2026 Unauthorised Usel / Or Duplication of this material without express and written permission from this blog’s author is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to simonthewizard and http://www.simonthewizard.comwith appropriate and specific direction to the original content