All photos are the copyright of MR Markus Neuner (c) http://www.neuner.de

So there was the joke about it being a good taxi CB and now it is here to write that the 950P will be here in the next days for a look around and see what it can do. Of course if you want or need to play with the open version then you need to order software and cable when you purchase the radio.

So what do we know about the frequencies and the power settings of the radio:

28.000-29.995 FM ONLY and when use software works 26.000-29.995
50.000-52.000 and when unlocked 50.000-53.995
108.000-136.000 AM ONLY RECEIVE (Airband)
144.000-145.995 and when unlocked 136.000-174.995
430.000-439.995 and when unlocked 400.000-480.995
65.000-108.000 This is for FM Radio Only

And with this we need of course to know the steps and what can indeed be programmed into the radio:

5 / 6,25 / 10 / 12,5 / 20 / 25 / 30 / 50 / 100 kHz

So fine for the PMR Men & the Freenet people who want to use it for these reasons

And now with the power, and please note this is based within the amateur bands and of course can be different when used outside of band.

10m High Power 50 watts Mid Power 15 watts and Low Power 5 watts
6m High Power 50 watts Mid Power 15 watts and Low Power 5 watts
VHF High Power 50 watts Mid Power 15 watts and Low Power 5 watts
UHF High Power 40 watts Mid Power 15 watts and Low Power 5 watts

And with 999 memory channels it makes it useful for all those CB, Amateur Repeaters and of course the PMR and Freenet channels (40 watts on 446MHz never hurt anyone)

Sent from Iphone5