Transceivers – QRPver-1 v.3 HF Mono ( SSB / CW / JT65 / PSK / BPSK / FSQ )

Thanks go to Loic for sending me information about the QRPver-1 which is a mini radio single band and included in the options is 11m and working between 26.950 and 27.860 so that’s interesting as not seen many of these radios come with this option. $190 plus shipping will get you this radio and information is below.

Brief specifications:

Power supply in the 10-14 (13.8 Nominal)

Current consumption in receive mode with an average volume of 100 mA

600-800 mA in transmission mode (mean 700)

Receiver sensitivity better than 0.4 Microvolts

Transmitter Output Power 3 W nominal. (Max 4 W)

Low-pass amplifier Output Power 0.7 W

Intermediate Frequency 6 MHz

Band crystal filter bandwidth 2.9 kHz at -6dB

Switchable LP filter (400-2900 Hz) with a fairly steep slope.

Carrier suppression more than 50dB

Suppression of non-operating side, more than 45 dB

The output power of the transceiver can vary from 1-10 Mhz 2,5 – 4  Watts, 14-30 Mhz 1,5 – 3 Watts, but not worse

Functional:

LSB / USB

CW / SSB / DIGI

Two AGC mode (Fast / Low)

Signal strength indicator (S-Meter)

Vertical / semi-automatic keyer

Turn on / off key for CW transmission

Enable / disable the transmission of AF signal at the input. For digital modes (DIGI-VOX)

The offset frequency for CW

Self-control for CW

Lock encoder

Indication of low voltage

And the link: http://tinyurl.com/yajuy4of

All Rights Reserved (c) http://www.simonthewizard.com 2013-2017 Unauthorised Use / Or Duplication of this material without express and written permission from this blog’s author is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to simonthewizard and http://www.simonthewizard.com with appropriate and specific direction to the original content.