My thanks to Wim whose wrote to me over the weekend about the Harrison II. Below I’ve added the “updated” specification from him. He’s compared the Sat shop in Switzerland 🇨🇭 and President own page. Thanks to Wim! Your one eagled eyed guy. Kind of you to write. Rob in the U.K. will be delighted it comes with CTCSS/DCS but maybe no split.
Have you got news for me? Please use the contact form…
– 12 / 24 V
– Channel rotary switch
– Volume adjustment and ON/OFF
– Manual squelch and ASC
– Multi-functions LCD display
– S-meter
– Vox function (Hands free)
– ANL filter, NB and HI-CUT
– NRC
– Noise Gate
– CTCSS/DCS
– Scan
– Preset emergency (EMG 1/2)
– F function key
– Beep Function
– Roger Beep
– Mode switch AM / FM
– Talkback
– Tone
– Micro Type (Electret / Dynamic)
– Public Address
– SWR Automatic
– Key locking
– Front microphone plug
– External loudspeaker jack
– USB 5V 2.1A
All Rights Reserved (c) http://www.simonthewizard.com 2013-2022 Unauthorised Use / Or Duplication of this material without express and written permission from this blog’s author is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to simonthewizard and http://www.simonthewizard.comwith appropriate and specific direction to the original content.
Simonthewizard 
From the President european website:
…
– Scan Skip
– Preset emergency (EMG 1/2)
– ***Repeater/Relay (only on the D frequency band)***
– F function key
– Beep Function
…
LikeLike
Brilliant news thanks so much for sharing with us here
LikeLike
Looking good, hopefully same ctcss structure as Randy 3 so can do split ctcss/DCS tones?
Fingers crossed ,why some ask VoIP Gateways and Repeaters use where split tx is not allowed in some markets areas.
Channel repeater shift +/-offset,would be very handy addition too for certain markets where allowed.
S-NFM 8K0 F3E USA/EU specs
I would be shocked if President added a special mode for UK 27/81band by putting a function on Mode switch to switch FM tx deviation in either 2.00khz max (8ko F3E) or 2.5khz (11k0 F3E) in UK band only.
Why ?it would elevate old CB specs MPT1320 Vs new CB ETSI specs equipment with operationally older CB radios the “you sound a bit quiet to me”issue in UK,a kinda backwards compatible mode.
It would be a nice operational feature and stop some going into the service mode and playing.
As all new CB use “soft pots now”it’s just a firmware tweek to allow
Dev-1:1.90khz (EU/UK EN STD)
Dev-2:2.20khz (UK MPT1320)
In UK band mode only!!!
Mode switch AM FM(EU-Dev1) EU Band,UK band FM1(tx Dev 1),FM2(tx Dev 2) so can do either.
So if end user is struggling to older CB user ,switch mode to higher Dev2,fixed!!
End user happy 🐻
Bear.
Just an idea!!
You always got service mode by dealer to tweek things for UK uses.
But all will be revealed I guess at some point,fab stuff cannot wait to see👍
Rob P (RPC)
LikeLike