Digimike Day. Opened the box and plugged it into a Bill II, a McKinley and George II and defaults to TX like was wired not ok or internal plug loose. Opened and checked the internal plug was fitted great and checked the wires in Mike plug against another Digimike and was fine too. So we retire it and put back to cupboard! But we’ve a couple of photos for you.

Update: Dismantled the microphone again and disconnected Mike cable from the microphone. Blew some air under pressure and then refitted the cable and assembled the mike. Works again no troubles. I have three of these mikes for different radios and only this small issue seems possibly dust or something in mike plug. Blew air through it and now perfect.

All Rights Reserved (c) http://www.simonthewizard.com 2013-2023 Unauthorised Use / Or Duplication of this material without express and written permission from this blog’s author is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to simonthewizard and http://www.simonthewizard.comwith appropriate and specific direction to the original content.