I’ve been asked by three people to comment about whether I’ve modified my audio on the Albrecht. Well not as much as you’d imagine. When you unscrew the microphone there is a lot of free space inside it which can make a sort of hollow sort of sound. In these areas I’ve padded it out to make the empty space less. Fitted foam like the sort you find on PC headset microphones etc.

Above is the board inside the microphone and on the electret you see a rubbery cover. I’ve taken mine away and where it’s sitting on the microphone housing I’ve added some foam to stop the sort of spit puff puff sound from going into the microphone.

Mike 1 and setting electret not dynamic

Mike 2 Off

On the Anytone / Radioddity they have Mike 1 the supplied Mike

Mike II This is for the supplied microphone adapter (Radioddity)

Mike III This is the multi-function microphone

That’s what have done on my radios here

All Rights Reserved (c) http://www.simonthewizard.com 2013-2026 Unauthorised Use / Or Duplication of this material without express and written permission from this blog’s author is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to simonthewizard and http://www.simonthewizard.comwith appropriate and specific direction to the original content