TYT CB Mini (Possibly SSB?) $195

Hard to guess true or not? Partially advertised as AM/FM and in same statement it says AM/FM/SSB

β—†β—† FM/AM/SSB mode

β—†β—† Weather Channel 150-170MHz programmable(Optional)

β—†β—† CTCSS/DCS Code(Optional)

β—†β—† PWR, RX RSSI S-Meter

β—†β—† PCprogrammable

β—†β—† Echo Function

β—†β—† SQ, ASQ Function

β—†β—† RF Gain Adjustment

β—†β—† Mike Gain Adjustment

β—†β—† H/L power

β—†β—† Programmable RB

β—†β—†NB/ANL Function

β—†β—† Offset Function

β—†β—† Beep Voice Prompt

β—†β—† +10KHz Function

β—†β—† TOT Function

β—†β—† HI-CUT Function

β—†β—† Busy channel lock


β—†β—† Monitor

β—†β—† LED Brightness Adjustment

β—†β—† SWR Protection

β—†β—† Voltage Protection

Link to advert: https://tinyurl.com/a6tryndp

What we can see the power lead is similar to RP-70 only connectors weren’t on the sample shown. The AM/FM is $81 from eBay where as one advertised is shown AM and FM with SSB same advert. So needs time, there are a few weird anomaly with this and it’s SSB friend. All appears not as seemed.

All Rights Reserved (c) http://www.simonthewizard.com 2013-2025 Unauthorised Use / Or Duplication of this material without express and written permission from this blog’s author is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to simonthewizard and http://www.simonthewizard.comwith appropriate and specific direction to the original content

3 comments

  1. Needs clarifying modes

    Needs ctcss/DCS (A must have on FM mode)
    Needs NRC TX/RC
    Needs repeater shift 100khz +/-
    Needs 2.00/4.00khz FM deviation
    Needs UK+expanded mode
    Needs a reverse DTMF keypad on back of microphone (all-star links ,echolink control tones)
    Needs 10m ham mode with VFO
    Needs fast/slow AGC
    Needs wide 4k /3.0k narrow ssb tx audio response.

    Those are the standards now have to meet on
    CB and 10m ham radio users needs in one box
    I cannot see this banging out a lot of RF with tiny heatsink so dont get too over excited.

    Also no stability specs or is it tcxo 1ppm for ssb stability ?
    Has to be super stable due to it size and heat build up so tcxo reference is essential in ssb stabilization.

    Too many questions yet not enough solid answer out …

    If TYT can pull it out the bag and the above could be a really neat unique set,best of luck to them,sell bucket loads πŸ˜ƒ
    But if they bring out a dulled down version hmm all I’ll say.

    Rob.P
    RPC Systems

Comments are closed.