Anytone AT 5289 II Move jumper to 2-3 turn on Freq/Set Pressed
Albrecht AE5900 Move jumper to 2/3 and solder wire across the white line. This enables high power and you must select the work mode HAM öt HF to use the extended full features
CRT Mike II
Thank you so much Helmut Frequenzwaschl for the manual below
Above sincere thanks Helmut Frequenzwaschl
Yaesu FTX-1 Solder Jumper close 1 on main head unit and fully reset radio
Service Manual Midland M88
Radioddity CB-900 Pro
Moonraker Titan Banding & Unlock
Midland 8001 PRO
Anytone AT-300/310 Schematic
Icom IC-7760 Modification Of Both Unit & RF Deck
Remove D7315 on control head and D4115 RF Deck (EU)
President JFK II A+
Albrecht 6390 High Power Mode
PTT + Mode + Scan = Turn on and PL or PH
The above works but maybe need break seal and move jumper
Service Mode
PTT + P1 + Scan = Service Mode
Does Radioddity CS-47 have service mode or software? I found a “PC” mode with key presses but can’t do anything with that.
Thanks,
Dan (Virginia, USA)
Yes it has service mode but not allowed to publish it. PC is for updating firmware via main unit..
Software not heard of
Hola
Gracias por todo el contenido de valor de esta página
Como puedo abrir de banda la JOPIX Doris ??
Un saludo.
Yes via key press
Long time since used this radio think you need press round button and m3 while turning on? If not ok I’ll need look at home when am there
Hey Simon, I’d love to send you my President Harrison 2 for mods, how do I do that?
Any information on how to access Anytone Ares II engineering Menu?
Yes I have it. Just no time to add it yet other things bigger priority
Ooh, I also need it.
Ooh, I need it also.
please i need the schematic cable rj45><usb connect rt-95 thank
I don’t have it I think. For which Radio it’s needed
Hi
Its any chance to get frequency list for alinco dx-10 for programing ?
We’ve got standard DAT not any modified ones with U.K. 40 or repeater just standard 28000-29600
Thanks Simon for the reply about the Anytone Ares II engineering Menu, will be waiting until someone post how to enter the menu, the radio is actually a nice radio but definitely needs some adjustments. Thanks for what you do for the radio community 73’s
Anytone Ares II Engineering Menu? Been looking anywhere my radio needs adjustment on ssb and fm, under modulated on both modes, AM is fine.
It’s keypress routine triggered by PTT. Sadly can’t report it as many people without equipment made errors. But can say it’s PTT, Mike buttons and on radio switches need be in certain configuration
Following post, I own one also and no where to find how to enter engineering Menu. Simon could you give us a clue on the radio switch configuration
Please wait a while and I’ll try record something for the blog which will hint pretty much at it but in meantime please kindly wait… Sorry
Hopefully you’ll be able to help on this one as you have with so many other models. Definitely helps in keeping the hobby moving forward. Many thanks for all that you do for all the Dx fanatics worldwide 🎙️🎙️🎙️ 73s
Hello, I have a President Lincoln 2+, is there a mod limiter to remove or is it just a variable pot?
Service manual is available to download
Hello . Is there any way to mod uniden bearcat 980 ssb so i can use fm mode . right now i only have am and lsb-usb(ssb)
Nope needs new radio not possible to modify
I bought a President Lincoln II+ V4. I searched all over and can’t find a service manual online. The radio works fine out of the box but I like to have the service manual for my radios. Can anyone help guide me to a pdf file?
Only v3 Schematic out there. Never seen v4
Hello! i have 1 radio anytone AT-708 it is dead ic microprocessor. Is there any way to get the driver program to load a new CMU chip?
Sorry these are not supplied from factory. Apologies
Hi, I have CRT SS7900 transceiver, pcb 5555NPCB2 20140806. Do you have the wiring diagram for that?
Thanks
Click this link and diagram for microphone is the same as one here: https://www.crtfrance.com/en/mobiles-transceivers/993-crt-ss-7900-v-turbo.html
Hi I’m looking for a dat file 10m 11m andcuk muppets for alinco dx-10.
To download. If you can help at all
Many thanks
merhaba bende yantone t320 model var.Program bulma imkanim varmı.
Available by email: mailto:sales@yantonradio.com
It needs password, software via email
Hi Simon
I’ve got the cable and disc for the SS6900N
I’m trying to disable the BUSY
I have the cable connected from the radio to the computer
On the disc once downloaded I see channel info
Band A-F then I see BUSY enable or disable What is the next stage
Thanks
Hi Good Morning
Read from radio (I’d save a copy)
Disable the busy or what you need
Write to radio
Turn off, remove cable
Turn On
Busy should be gone
Regards
Hi Simon , do you know where to get Alinco-Dr135UK programming software ?
Thanks,
Alex
I’ll have a look do you have a V3 or a V3.1 firmware as it’s needed for the programming software
Do you know how to unlock frequency lock on Wouxon KG-UV8H?
Hi simon!
I have an Intek M-120 Plus I am looking to increase modulation and the frequencies on it too. I seen your Video on youtube from 13 years ago so I know its a long shot but if you can help I would greatly appreciate it!
Many thanks dave!
Hi Dave. Schematic was sent to you via email days ago.
Regards
Simon
So the diagram is sent for the audio I checked again some days ago. Frequencies behind the chip is LK1 soldered closed, remove solder and it’s unlocked 25610-30110 and 25615-30105
Sorry Simon, thats not fair! The only reason why i buyd a Midland 88 was the possibility to open it into VFO Mode! Now i havent the PW anymore. This behavior is not HAM like. 73 ODIE74
By the Way, i allso HELP other young HAM and CB Radio User….without any Loan! I do it for our Great Hobby! As a HB9SOTA!
Sorry…. 73, ODIE74
Good for you. Congratulations 🎉 am sure you’ll continue doing the same as everyone will be happy
Ham Spirit = Simon buys software and then gives it everyone for free
Ham Spirit = Want more and more for free
Ham Spirit = Not pay yourself, expect others to do so!
So it shows locking away mods = 100% correct. They are here, know where they are you’ll find them. But don’t look you don’t find
It’s completely fair. I worked hundreds of hours to get mods. So it’s tough luck really!
Hi Simon,
you have fine website! With all these documented mods it is a basket full of gold nuggets!
73 Andy
Hi Andy. Your most kind. And hopefully a lot more to come. Just needs expansion of the blog which takes time sadly but more is added now and then as it’s time dependent. Very best wishes
Simon
Hi simon,
I got an Intek KT-950EE. And (as you probably already know) it isn’t the export version ( KT-950XE ) and because of that the vhf only works from 144.000. – 146.000. Instead. 136.000 – 174.000 .
I can’t find the mod anywhere and I hope you can help me.
Thnx in advance
Martin
Hi Martin. It’s software and cable unlock if older version and newer by key routine. We don’t have this unlock 😞 but we can ask around after the holiday weekend ends here
Regards
🧙♂️
Thnx for the reply.
Unfortunately i don’t have the cable , so i hope this version can be modified by keys.
If you could ask around that would be great.
Thnx in advance ( again 🙂 )
Martin
Salve Simon sono in possesso di un Cobra 29 LX EU sto cercando qualche modifica per espandere le frequenze tu sai qualche cosa a riguardo ciò ti sarei grato .Vincenzo
No modifications ever came for this radio. Nothing at all ever was released on LX EU
Hi, I wanted to know if you can in the crt ss 6900n v6 have the modification to do the 60 channels without losing the data when you do the reset? Thanks, Enrico
Ciao Enrico. Reset the radio and 60ch returns to 40 until programmed again via PC and software. Regards Simon
hi simon.I have a TTI 880 Max and i want to do a mod for 10 m or to change to export norm…can you help me pls..thks 73
Hi. TTI is in the blog, but newer version people had troubles as new maker but mod is the same. Regards Simon
Hello Simon looking for information on an Anytone AT-6666 for external S meter connection points, bhi DSP connection points, and connection points for an external VFO and schematics and also the service manual
Secondly looking for connection points for the bhi DSP module external S-meter connection points in an Alinco DX-SR8T
Anyone external S meter is on the blog
DSP Don’t have
Service Manual not released
Schematic on the blog too
Alinco most run the speaker, internal no idea
Hi Simon !
First off thanks for the information on the power mods for the President Walker 2 CB. It is much appreciated. Do you have any mods you can share for increasing the modulation ? Again thanks for your work and advice !!! Mike
Hi Mike. There is a way to increase it, it’s on the blog. Sadly I’ll not announce it as each radios values are different and too many armchair engineers have messed up radios by not having test gear, not writing down values before modifying the equipment.. Then when they’ve a paperweight they cry!
Regards
Simon
Hi Simon,
I completely understand your concerns about posting the mods for increasing modulation for the President Walker. I will not be doing this mod myself. I have an an experienced shop doing it for me. He told me if I could research the mod he would do it for me. He does not have the time to do the research, I looked and looked but I could not find it. I found the service manual and a link to a Polish company that sells the radio with the mods. Would you please consider emailing me the mod ? I promise, he is a great radio tech and has all the correct equipment. If something went wrong I certainly would not hold you responsible in any way. If you don’t feel comfortable, then that is OK too. No hard feelings !!
Mike
Hi Mike. The english service manual is on here and its got the way in it.
Regards
Simon
Hi Any power mods for the President Walker 2 Radio ? Thanks !
Yep
Hello, Simon
Is there a way to add an external s-meter to a CRT SS6900 (at-5555 and so on..). WHERE can I take the signal?
Thanks a lot.
Patrice
Hi Patrice. Yes I know it’s possible via 1 tap and using CW socket but sadly it’s sold as a modification from businesses and I don’t have it here 🙁
Only have 6666 mod: https://simonthewizard.com/2020/10/18/new-at-6666-external-s-meter/
Regards
Simon 🧙♂️
Maybe ask on 6900 forum on Facebook? Maybe someone has the modification